Before you use your Tassimo T45

Pull a suitable length of the power cord out of the storage compartment and plug it into an electrical socket.

Remove and rinse the water tank thoroughly under running water.

Fill the water tank with cool fresh water up to the MAX mark.

Remove the Service T DISC from its compartment at the back of the appliance.

Now put the water tank back and push it firmly down into place.

Turn the on/off switch on.

All display items will light up briefly and then Stand-by stays lit.

Select a large cup (min. 8 oz / 200 ml) and place it on the cup shelf.

Open the brewing unit by lifting the lid.

Place the Service T DISC on the T DISC holder with the barcode facing down.

Make sure that the flap of the T DISC is secured in the slot to the right.

Close the brewing unit by pushing the lid down firmly until it audibly clicks into place.

Press the start/stop button.

The cleaning process starts and dispenses water into the cup.

When the process is complete, empty the cup and put it back on the cup stand.

Repeat this step 4 more times.