Introduction
Follow the steps below to brew a great cup of coffee.
-
-
Turn your Tassimo machine on and make sure it has sufficient water in the water tank. When ready, the Stand-by icon will light up.
-
Place a suitable cup on the stand, according to the type of drink you will be brewing.
-
If necessary remove the cup stand.
-
-
-
Select your T DISC.
-
Open the brewing unit by lifting the lid.
-
Insert the T DISC with the barcode side down. Be sure the tab of the T DISC is secured in the slot to the right.
-
-
-
Close the brewing unit by firmly pushing the lid down until it clicks into place.
-
-
-
The stand-by light will flash while reading the bar code. When the Automatic icon lights up (green), your Tassimo machine is ready to brew.
-
Press the start/stop button.
-
For a stronger taste and a smaller drink, press the start/stop button at any stage during the brewing process to stop the process early.
-
For a milder taste and a larger drink, wait until the Automatic brewing process has finished. The Manual icon will light up; press and hold the start/stop button to manually extend the brewing process.
-
Sit back and enjoy your hot and tasty beverage.
-
-
-
Wait until the orange stand-by light is on before removing the used T DISC. The green light indicates your TASSIMO machine is still in use.
-
If you do not wish to prepare more drinks, we recommend that you turn off your TASSIMO machine using the on/off switch.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
4 Comments
Hey, Really it was an great article to read,Waiting for another one till that get more information about coffee makers,Keep it up!
Is Tassimo T45 a good coffee maker?